Pioneer Automobile Stereo Wiring Diagrams & Coloration Codes

If you happen to’re in search of wiring diagrams and colour codes for Pioneer automobile stereos you’ve come to the proper place. All the data we’re utilizing is from manuals which might be discovered at Pioneer’s official web site. Though a lot of the Pioneer automobile stereos are utilizing the identical wiring diagrams, we advise you to search out the unique guide particularly in your mannequin so that you might be positive you’re utilizing the proper information.

On this article, we’re gonna clarify wiring diagrams for sure automobile radios together with double din Pioneer DMH-100BT and FH-X720BT, and single din Pioneer MVH-S21BT.

Pioneer MVH-S21BT (Single DIN)

16-pin wiring diagrams & colour codes

When connecting the rear and entrance audio system.

Connecting a subwoofer with out the extra amplifier.

6. – 7. – Left entrance speaker: White (+), White/black (-)
8. – 9. – Proper entrance speaker: Grey (+), Grey/black (-)
10. – 11. – Left rear speaker (left): Inexperienced (+), Inexperienced/black (-)
12. – 13. – Proper rear speaker (proper): Violet (+), Violet/black(-)
14. Black (chassis floor) – Connect with a clear, paint-free steel
location.
15. Yellow – Connect with the fixed 12 V provide
terminal.
16. Pink – Connect with the terminal managed by the
ignition swap (12 V DC).
17. Blue/white – Connect with the system management terminal
of the ability amp or auto-antenna relay
management terminal (max. 300 mA 12 V DC).
18. Subwoofer (4 Ω)
19. When utilizing a subwoofer of two Ω,
remember to join the subwoofer to the
violet and violet/black leads of this unit. *Don’t join something to the inexperienced
and inexperienced/black leads.
20. not used
21. Subwoofer (4 Ω) × 2

When utilizing the non-compulsory amplifier.

1. System distant management
2. Connect with blue/white cable.
3. Energy amp (offered individually)
4. Join with RCA cables (offered
   individually)
5. To rear output or subwoofer output
   Rear speaker or subwoofer

Connections

1. Rear output or subwoofer output
2. Antenna enter
3. Energy twine enter
4. Fuse (10 A)
5. Microphone enter
6. Microphone 3 m (9 ft. 10-1/8 in.)

All information is taken from the manual.

Pioneer DMH-100BT (Double DIN)

Energy twine

1. To energy provide
2. Energy twine
3. Yellow – energy
4. Pink – ignition swap (12 V DC) ON/OFF
5. Orange/white – lighting swap
6. Black (floor) – to car (steel) physique.
7. Violet/white – Of the 2 lead wires linked to the again lamp, join the one through which the voltage adjustments when the gear shift is within the REVERSE (R) place. This connection allows the unit to sense whether or not the automobile is shifting ahead or backward.
8. Blue/white – Connect with the system management terminal of the ability amp (max. 300 mA 12 V DC).
9. Gentle inexperienced – ON/OFF standing of the parking brake. This lead should be linked to the ability provide aspect of the parking brake swap.
10. Energy provide aspect
11. Parking brake swap
12. Floor aspect

Speaker wiring

1. To energy provide
2. Energy twine
3. Left
4. Proper
5. Entrance speaker
6. Rear speaker
7. White
8. White/Black
9. Grey
10. Grey/black
11. Inexperienced
12. Inexperienced/black
13. Violet
14. Violet/black
15. Pioneer FH-X720BT (Double DIN)

All information is taken from the DMH-100BT manual.

Pioneer FH-X720BT (Double DIN)

14-pin wiring diagrams & colour codes

The wiring when connecting a rear and entrance speaker.

Diagram when utilizing a subwoofer with entrance audio system.

6. – 7. – Left entrance speaker: White (+), White/black (-)
8. – 9. – Proper entrance speaker: Grey (+), Grey/black (-)
10. – 11. – Left rear speaker (left): Inexperienced (+), Inexperienced/black (-)
12. – 13. – Proper rear speaker (proper): Violet (+), Violet/black(-)
14. Black (chassis floor) – Connect with a clear, paint-free steel
location.
15. Yellow – Connect with the fixed 12 V provide
terminal.
16. Pink – Connect with the terminal managed by the
ignition swap (12 V DC).
17. Blue/white – Connect with the system management terminal
of the ability amp or auto-antenna relay
management terminal (max. 300 mA 12 V DC).
18. Subwoofer (4 Ω)
19. When utilizing a subwoofer of two Ω,
remember to join the subwoofer to the
violet and violet/black leads of this unit. *Don’t join something to the inexperienced
and inexperienced/black leads.
20. not used
21. Subwoofer (4 Ω) × 2
22. Orange/white – Connect with a automobile’s illumination wire.
23. Yellow/black (Just for FH-X520UI) – If you happen to use gear with a Mute operate, wire this results in the Audio Mute lead on that gear. If not, hold the Audio Mute lead freed from any connections.

When connecting to an amplifier.

1. System distant management
   Connect with blue/white cable.
2. Energy amp (offered individually)
3. Join with RCA cables (offered
   individually)
4. To rear output
5. Rear speaker
6. To entrance output
7. Entrance speaker
8. To subwoofer output
9. Subwoofer
10. To rear output or subwoofer output
11. Rear speaker or subwoofer

Connections

1. Energy twine enter
2. Microphone enter
3. Microphone (4 m)
4. Rear output or subwoofer output
5. Entrance output
6. Antenna enter
7. Fuse (10 A)
8. Wired distant enter – Arduous-wired distant management adapter can
   be linked (offered individually).

All information is taken from the Pioneer FH-X720BT manual.